Applications
- DC Output inductors
- Power factor correction chokes
- Differential mode input chokes
- Flyback Transformer
Benefits
- Linear Permeability for wide range of frequency
- Small sizes
- High saturation flux density (1.56T)
- Low temperature rise due to low loss
- Low loss-owing to thin amorphous ribbon
Ribbon Thickness (µm) | 25 |
Density (g/cm3) | 7.19 |
Thermal Expansion (ppm/℃) | 7.6 |
Crystallization Temperature(℃) | 550 |
Curie Temperature (℃) | 415 |
Continuous Service Temperature (℃) | 120 |
Tensile Strength (MN/m2) | 1k-1.7k |
Elastic Modulus (GN/m2) | 100-110 |
Vicker's Hardness (50g load) | 860 |
Saturation Flux Density (Tesla) | 1.56 |
Permeability (Depending on gap size) | 149-390 |
Saturation Magnetostriction (ppm) | 27 |
Electrical Resitivity (µ-ohm-cm) | 130 |
PART No. | FINISHED DIM ODxIDxHT (mm) |
Lm* (cm) |
Ac* (cm2) |
Core Wt.* (gm) |
Window Area (wa) (cm2) |
µ±15 % |
AL ± 15 %(nH) |
UM0905GTC | 11.7x4.3x7.3 | 2.51 | 0.06 | 1.05 | 0.145 | 312 | 36 |
UM1205GTC | 13.3x6.2x7.3 | 3.06 | 0.05 | 1.62 | 0.301 | 255 | 58 |
UM1305GTC | 15.3x5.7x7.3 | 3.30 | 0.11 | 2.60 | 0.256 | 149 | 62 |
UM1505GTC | 17.3x6.7x7.3 | 3.77 | 0.13 | 3.60 | 0.353 | 166 | 72 |
UM1805GTC | 20.7x10.4x7.3 | 4.88 | 0.13 | 4.17 | 0.849 | 152 | 61 |
UM1810GTC | 20.3x9.7x12.3 | 4.71 | 0.24 | 8.00 | 0.74 | 173 | 111 |
UM2110GTC | 23.3x12.2x12.3 | 5.58 | 0.26 | 10.40 | 1.17 | 237 | 136 |
UM2510GTC | 27.3x19.2x12.3 | 7.30 | 0.14 | 7.30 | 2.89 | 390 | 94 |
UM2610GTC | 28.3x13.7x12.3 | 6.60 | 0.38 | 18.00 | 1.47 | 181 | 131 |
UM3710GTC | 39.3x20.7x12.3 | 9.42 | 0.53 | 36.00 | 3.37 | 183 | 130 |